Uporabnik:
Geslo:
Nov Uporabnik? Pozabili Geslo?

28.04.2017
Brusshles motor JOKER 4250/7 -720 RPM/V

In section Članki/F3A/electric drive / tests of other E-engines, is added above engine test. 27.02.2017
Dodan model Miss Wind 50E

V rubriko MODELI/Elektropogon je dodan omenjeni model. 14.02.2017
Brusshless motor JOKER 5055-09, 500RPM/V

In section Članki/F3A/electric drive / tests of other E-engines, is added above engine test. 03.08.2016
EP v akrobatskem F3A letenju, Untermünkheim , Germany

V rubriki članki/F3A/Competitions je dodano kratko poročilo o dogajanju na EP

Petek, 22.03.2019
BULLDOG F3A Nazaj na članke
Model building | Wooden construction

F3A plane building for season 2011.
In 2011, Slovenia will take place the first time the FAI F3A competition rules.

Manufacture of ribs and sides of the cell body

Manufacturing of formers 6-10.  3 mm balsa was used for the first two models.
Later these fins will be milled of plywood.



Manufacture of side Cells

The sides are made from 3mm balsa of medium hardness (100x1000 mm, panels weight about 40g)


Fuselage formers for two models




Manufacture of the second half sides

Production was manual, with olfa knife and ruler.


Made side

On the longitudinal edges of the sides were glued 8x3mm reinforcement  spruce slats.


Made a pair of side

Always pay attention to symmetry while building .......


BULDOG F3A

Almost finished model.



Dodano: 31.01.2010 | Ogledov: 7963 | Komentarjev: 0 | Avtor: marko


Komentarji:

Trenutno še ni komentarjev. Bodite prvi!

Komentarje lahko objavljalo le registrirani uporabniki.
Če ste že registrirani, se prijavite levo zgoraj.

Če še niste registrirani, opravite hitro registracijo »

Komentiraj:




Imate kvalitetno snov za članek in bi ga želeli objaviti na naši strani? Kontaktirajte nas na info@e-modelar.net in dodeljen vam bo status pisatelja člankov!